Injection molds are now widely used in multiple industries, especially because they have very rich forms of expression. They can be made to be versatile, flexible, or soft, making them very practical for everyone. When designing and manufacturing injection molds, there are several key factors that need to be considered to ensure high-quality products.
During the production process of injection molds, injection mold design and manufacturing factories pay great attention to the adjustment of temperature throughout the entire production process. This is because the production process of injection molds involves melting solid plastic materials at high temperatures to form a fluid with flowability, which is then injected into the corresponding mold and finally produced into a plastic product with the desired shape.
Another aspect that needs to be considered during the production of injection molds is pressure. If the pressure used during the production process by the injection mold design and manufacturing factory is too high, it can easily cause the volume of the product produced later to be squeezed too small, resulting in an unqualified product.
The injection mold design and manufacturing factory must also control the injection speed of the raw materials during the production process of injection molds. Injection speed can have a significant impact on the production effect of the product. If the injection speed is too slow, temperature differences can occur between the front and back portions of the material, causing fractures or dents in the final product, which can affect the appearance and mechanical strength. However, if the injection speed is too fast, it can lead to cracking of the injection mold during production, which is why it is important to find a balance between speed and quality.