Contact Us
Manufacturing of Dies for Automobile Covering Parts in China

Manufacturing of Dies for Automobile Covering Parts in China

Manufacturing technology of automobile panel die is becoming more and more mature in China, which has changed from extensive development mode mainly relying on scale expansion and quantity increase in the past to lean development mode mainly relying on scientific and technological progress and improving product quality and level; from development mode mainly relying on importing and digesting advanced international technology to importing, digesting, absorbing and improving itself. The transformation of the development mode of emphasizing both the main innovation ability and the modern enterprise management ability; the transformation from the skill-based industry characteristics to the technology-based and modern enterprise management-based industry characteristics; the innovation-driven development mode is being vigorously promoted, and new growth points are actively cultivated and developed.


The mode of production of mould maker company has changed from simple production to production service. Due to the continuous increase of labor costs in developed industrial countries, it is forced to transfer molds to developing countries, especially countries with a better technological foundations such as China, in order to reduce production costs. Companies in other countries have nurtured chemical plants in their strongholds in China. In the international market, the development technology of the die and mould industry has entered an era of accelerated competition. Each mould maker company has increased the investment of advanced technology.


Related News
  • The Main Scope of Mold Modeling Services

    The Main Scope of Mold Modeling Services

    April 21, 2020Mold modeling service: It usually refers to the 3D modeling of the product, focusing on the use of software. The 3D modeling of the mold structure is more focused on the test of the 3D design software...view
  • Shape-Following Cooling Can Greatly Improve The Production Efficiency Of Injection Molds

    Shape-Following Cooling Can Greatly Improve The Production Efficiency Of Injection Molds

    October 28, 2019For plastic mold making company, as the quality of the mould directly determines the production efficiency of injection molding and the quality of the product, which determines the added value of the ...view
  • What is Precision Injection Molding

    What is Precision Injection Molding

    October 28, 2019Precision injection moulding refers to an injection moulding method that the dimension repetition accuracy of injection moulded products is very high so that it is difficult to meet the requirements b...view
  • Movement Principle of 3 Plate Mold

    Movement Principle of 3 Plate Mold

    June 24, 2020With the development of intelligence and miniaturization of electronic products, the precision of products is getting higher and higher, and the application of 3 plate mold I / M process is becoming m...view
  • Matters Needing Attention During Mold Trial

    Matters Needing Attention During Mold Trial

    April 21, 2020The engineer in charge needs to prepare DFM to check the mold structure in detail. If there is any doubt, it needs to be clarified on the spot. If there is something wrong, it needs to be recorded and...view
  • How to Make Good Plastic Part?

    How to Make Good Plastic Part?

    July 30, 2019The key point is design, good design comes to high yield production.Design level leads to lower costs and better efficiency.80% of the troubles found during mould trial and mass prodcution was due to ...view
Plastic Injection Moulds
Plastic Parts Gallery